SELF-GUARD SG-2000 Spezifikationen PDF herunterladen (Seite 10)

it to a sudden change of temperatures, there is the possibility that

condensation can form on the exterior or on interior components.

Condensation can cause malfunction of the Self-Guard, so you should

avoid exposing it to conditions that might cause condensation.

¾ To keep condensation from forming, place the Self-Guard into the Carry-

Along Bag before moving it into a location that is much warmer or colder

than your current location. Leave it in the plastic bag until the air inside the

bag has a chance to reach the same temperature as the new location. If

condensation does form, remove the battery from the Self-Guard for a few

hours.

 Lens

¾ Never apply too much force when cleaning the surface of the lens. Doing

so can scratch the lens surface.

¾ Dust or any other soiling of the lens can interfere with proper image

recording. You can remove dust particles from the lens surface by using a

lens blower to blow them off. Next, wipe the surface of the lens with a soft

lens cloth.

 Others

¾ The Self-Guard may become slightly warm during use. This does not

indicate malfunction.

¾ If the exterior of the Self-Guard needs cleaning, wipe it with a soft, dry

cloth.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 96 97

Keine Kommentare

SELF-GUARD SG-2000 Spezifikationen Seite 10